MIDMARK M9 – STEAM STERILIZER
The Midmark M9 Steam Sterilizer uses a small footprint to drive big productivity. If space is limited in your steri-center, the M9 makes a good fit. This sterilizer is designed to help optimize your instrument processing workflow while maintaining safe and reliable sterilization.
Steam-flush pressure pulse air removal system ensures proper steam sterilization.
Easy to Use
Pre-programmed sterilization cycles and intuitive LCD display with prompts ensure quick, confident operation.
Real-time alerts notify users promptly of any critical system errors.
Overall length w/plug:
20.38″ (51.8 cm)
15.3″ (38.9 cm)
Overall height w/printer:
16.1 in (40.9 cm)
Minimum countertop area:
17.88″ D x 15.3″ W (45.4 cm x 38.9 cm)
9″ diameter (22.9 cm)
15″ depth (38.1 cm)
3.5 gal usable volume (13.4 liters)
Two large –
7.3″ W x 12″ L x 0.8″ D
(18.6 cm x 30.5 cm x 2.2 cm)
Two small –
5.6″ W x 12″ L x 0.8″ D
(14.3 cm x 30.5 cm x 2.2 cm)
73 lb (33.1 kg)
81 lb (36.7 kg)
Water reservoir capacity:
1.1 gal (4.1 liters)
115 VAC, 50/60 Hz, 15 A single phase
115 VAC has 1,425 W tubular immersion heater
230 VAC, 50/60 Hz, 10 A single phase
230 VAC has 1,500 W tubular immersion heater
Installation: Use on a level, water-resistant material such as laminate, stainless-steel or stone. Allow 2.0″ (5.08 cm) on sides and rear, and 5″ (12.7 cm) above to allow space to fill reservoir and change the printer paper roll.
UL listed to US and Canada standards
UL 61010-1, 2nd edition
IEC 61010-2-040, 1st edition
CAN/CSA C22.2 No. 61010-1, 2nd edition
CSA C22.2 No. 61010-2-040-07, Part 2-040, 1st edition
Meets the requirements of ASME Boiler and Pressure Vessel Code.
A separate (dedicated) circuit is recommended for this sterilizer.
IEC 60601-1-2 Edition 4.0 2014-02
CISPR II:2009, A1:2010 Class A, Group 1
IEC 61000-3-2:2014, Part 3-2
IEC 61000-3-3:2014, Part 3-3